Parker’s Date Coding Systems

Reference Info Index | Glossary  ]


Sometimes, it’s really easy to nail a particular pen to a year. Sometimes, it’s not. Parker has made it very easy to date some of their pens. From the 1932/1933 introduction of the Vacumatic until the 1950s, and again beginning in 1980, Parker has imprinted date codes on its pens.

The First System: 1932 to c. 1955

At the right end of the barrel imprint, look for a one- or two-digit number followed by one or more dots. (Some pens also have a date code on the nib.) Early pens have two digits. In this code, the second digit represents the last digit of the year of manufacture. The first digit represents the quarter of the year; 1 indicates the first quarter (January through March), and so on. Thus, a pen with a date code of 46 was made in the fourth quarter of 1936. During the second quarter of 1938, the first digit disappears, to be replaced by a system of dots in which three dots indicate the first quarter, two indicate the second quarter, and one indicates the third quarter. If there are no dots, the pen was made in the fourth quarter. A pen with a date code of 9. was made in the third quarter of 1939. The following illustrations show the usual placement of the dot patterns:

Quarter
 
1 2 3 4
Dot Pattern . 0 . . 0 .   0 . 0
.
(Note that because of the timing of the changeover, the earliest pens with three dots are from 1939.)

For pens that fall into the period after the changeover to a single digit with dots, the date codes break down for years with the same last digit. For example, 8 could indicate either 1938 or 1948. In this case, you must use the design features of the pen to determine the pen’s actual date of manufacture.

For the “51” (introduced in 1941) and other pens whose manufacture continued past 1949, the same coding holds true except that in 1950 the date code again became two digits of which the first is a 5, so that any code beginning with a 5 indicates a pen made in or after 1950, as specified by the second digit.

The Second System: 1980 to the Present

This code has been in continuous use since its inception, with slight format changes every so often. At or near the cap lip, look for a series of letters. A letter from the series QUALITYPEN represents the last digit of the year of manufacture, as follows:

Last Digit of Year
 
0 1 2 3 4 5 6 7 8 9
Code Letter Q U A L I T Y P E N

For example, the presence of a Q indicates a pen that could have been made in 1980, 1990, etc., while P indicates manufacture in 1987, 1997, etc.

From 1980 to 1986, the year letter is the first character. Following it is a letter to mark the quarter of the year:

Quarter
 
1 2 3 4
Code Letter
E c L I

From 1987 through 1999, the quarter designation precedes the year letter, and it is in the form of the Roman numerals III, II, I, and nothing:

Quarter
 
1 2 3 4
Code Number
III II I

Thus, a pen marked UL was manufactured in the third quarter of 1981, and one marked IIIL was manufactured in the first quarter of 1994 or, if the code format had remained unchanged, 2004. To prevent any ambiguity between the 1990s and the 2000s, Parker in 2000 reversed the order of the year and quarter codes, also inserting a dot between them. Thus, pens made in the first quarter of 2000 were labeled Q.III instead of IIIQ as had been used a decade earlier. It appears that Parker made nor format changes in 2010; pens made in 2010 bear date codes identical to those on pens made in 2000. As with the original date code system, you will need to observe the features of the pen to determine when it was made. (E.g., the Premier was introduced in 2009 and so will not become a dating conundrum until 2019.)

Confused? Except for one instance of duplicated date codes, this system — while it might ber difficult to remember — has so far been unambiguous. The problem? IL is an ambiguous date code because it could represent the third quarter of either 1984 or 1993. If you have a pen with this code on it, you will need to know whether your pen was discontinued before 1993 or not put into production until after 1984. The most common model that can have an IL date code is the Sonnet, which entered production in 1993 and therefore cannot be a 1984 pen.

Notes:
  1. There was a period during which the two quarter-designation schemes overlapped; some 1938 pens bear a date code of .28. (both quarter-designation schemes indicating the second quarter of the year).


The information in this article is as accurate as possible, but you should not take it as absolutely authoritative. If you have additions or corrections to this page, please consider sharing them with us to improve the accuracy of our information.

© 2012 RichardsPens.com Contact Us | About Us | Privacy Policy